ADOPTED LEVELS for 65V

Authors: E. Browne, J. K. Tuli |  Citation: Nucl. Data Sheets 111, 2425 (2010) |  Cutoff date: 1-Aug-2009 

 Full ENSDF file | Adopted Levels (PDF version) 


Q(β-)=1.63×104 keV SYS(n)= 3.5×103 keV SYQ(α)= -1.50×104 keV SY
Reference: 2012WA38

General Comments:

2009Ta05: 65V identified by fragmentation of 76Ge beam at 132 MeV/nucleon at NSCL facility using A1900 fragment separator combined with S800 analysis beam line to form a two stage separator system. The transmitted fragments were analyzed event-by-event in momentum and particle identification. The nuclei of interest were stopped in eight Si diodes which provided measurement of energy loss, nuclear charge and total kinetic energy. The time-of-flight of each particle that reached the detector stack was measured in four different ways using plastic scintillators, Si detectors, and parallel-plate avalanche counters. The simultaneous measurement of ΔE signals, the magnetic rigidity, total kinetic energy and the time-of-flight (tof) provided unambiguous identification of the atomic number, charge state and mass number. See also 2009Ta24.

Q-value: Note: Current evaluation has used the following Q record

Q-value: ΔQ(β-)=950, ΔS(n)=1060 (2009AuZZ,2003Au03)

Q-value: Q(β-n)=13830 900, S(2n)=6480 1000 (2009AuZZ,2003Au03)

Q-value: S(p) and Q(α) from 1997Mo25




E(level)
(keV)
T1/2(level)
  0 > 360 ns
% β- = 100
% β-n = ?

Back to top

Back to top

Additional Level Data and Comments:

E(level)Jπ(level)T1/2(level)Comments
  0 > 360 ns
% β- = 100
% β-n = ?
Measured cross section=2.0×10-10 mb 3 (read by the evaluators from figure 2 of 2009Ta05).
E(level): Measured cross section=2.0×10-10 mb 3 (read by the evaluators from figure 2 of 2009Ta05).

Back to top